banner
page title image
Bel-Stone - components

List of main Bel-Stone components

1. Natural stone tiles

Natural stone tiles are cut to 20mm in thickness and 345mm x 680mm. They can be supplied in the following finishes:

Bel-Stone component photo

Light honed

Bel-Stone component photo

Dark honed

Bel-Stone component photo

Polished

Bel-Stone component photo

Light bush hammered


2. Panels

Panels are formed by casting natural stone tiles into polyurethane and sand to form composite prefabricated panels.

The animation of how panels are formed cannot be displayed as Flash/Javascript is either disabled in your browser or not installed. To install the Adobe flash player please use the following link:

Get Adobe Flash player

Panels are manufactured 60mm thick in stack bond Type RP panels and supplied typically 28no per pallet Additional layers of insulation can be laminated to panels in 10mm increments up to 120mm total thickness (quantities per pallet will depend on panel thickness).

Bel-Stone component photo

Bel-Stone
Panel Dimensions
: 1375 x 688mm
Joint Size: +/- 10mm


3. Corners

Corners are produced by mitring or abutting on site to suit external returns and opening reveals, eg jambs, soffits, etc.


Bel-Stone component photo

4. Fixing Screws

Fixing screws are available in various lengths and types to suit the following different substrates:

  1. Clay or concrete masonry: Supplied galvanised or stainless steel, 4.6 - 4.9mm Ø screws with 11mm Ø conical headed TORX T30 heads with polyamide plugs colour coded to suit substrate. They are available in lengths of 100mm, 120mm, 140mm, 160mm, 180mm, 200mm and 220mm and are boxed in 100s.
  2. Steel or timber frame: Supplied galvanised or stainless steel, 6mm Ø screws with 11mm Ø conical headed TORX T30 heads, with polyamide collars to suit min 15mm thick sheathing board. They are available in lengths of 90mm, 100mm, 120mm, 140mm and are boxed in 100s.

Bel-Stone component photo

5. Polyurethane Foam

Gebrik expanding polyurethane foam (type PUB) is used to fill joints between adjacent panels and ensure the system remains watertight and thermally efficient. Supplied in 750ml canisters with typical usage of 8m² per canister for use with Gebrik UK & 10m² per canister for use with Gebrik 61.


Bel-Stone component photo

6. Starter Rail

An aluminium starter rail ensures the system is thoroughly sealed at the base and provides a horizontal datum.

 

 


design by  like design
checked with W3C for  valid XHTML and  valid CSS
© 2011 Aquarian Cladding Systems Ltd, Registered in England & Wales No 6058031
Eversea Business Centre, 13 Gardens Road, Clevedon, North Somerset UK BS21 7QQ
T: 0044 (0)844 334 0077 | F: 0044 (0)844 755 0289 | E: